# Lalicat Proxy Setup – Step by Step | QuantumProxies.io

Add QuantumProxies to a Lalicat profile: proxy settings HTTP or SOCKS5, IP address, Port, Proxy Login Name and Password, or Paste proxy information, then Check.

## Lalicat Proxy Setup: Proxy Settings in the Browser Profile

Lalicat puts the proxy inside basic configuration of the browser profile. Choose the protocol in proxy settings, type the gateway host in IP address and the port in Port, then the login in Proxy Login Name and Proxy Login Password, or use Paste proxy information with the full line. Check the network tests it.

## Where the proxy goes in Lalicat

Profile List → Add Browser Profile → basic configuration → proxy settings

- **Proxy type:** proxy settings (protocol)
- **Host:** IP address
- **Port:** Port
- **Username:** Proxy Login Name
- **Password:** Proxy Login Password

Paste proxy information takes IP:port:Username:Password in one line.

## Set up the proxy in Lalicat

### 1. Add a browser profile

Open Lalicat, go to Profile List and click Add Browser Profile at the top. Set the name, group, OS and User-Agent as you like, then scroll to proxy settings in basic configuration.

![Lalicat Add Browser Profile form with the basic configuration tab](https://quantumproxies.io/images/integrations/lalicat/create-profile.webp)

Lalicat Add Browser Profile form with the basic configuration tab

### 2. Enter the proxy details

In proxy settings choose HTTP for the HTTP port or SOCKS5 for the SOCKS5 port. Type the gateway host in IP address, the port in Port, the username in Proxy Login Name and the password in Proxy Login Password. Or click Paste proxy information and paste the whole line.

![Lalicat proxy settings with protocol, IP address, Port, Proxy Login Name and Proxy Login Password framed in red](https://quantumproxies.io/images/integrations/lalicat/fill-proxy.webp)

Lalicat proxy settings with protocol, IP address, Port, Proxy Login Name and Proxy Login Password framed in red

### 3. Check the network and save

Click Check the network next to the protocol. A green result shows the country, region and city of the exit IP. Finish the profile and click Save in the lower-right corner.

![Lalicat Check the network result in green with the exit location](https://quantumproxies.io/images/integrations/lalicat/test-connection.webp)

Lalicat Check the network result in green with the exit location

### Check it

Check the network, next to the protocol selector. A green line names the exit country, region and city.

Launch the profile from Profile List. If the check is red, verify the protocol, the port and that the plan is still active.

## What to type: hosts, ports and the username

Copy the line from the dashboard (Proxies, your plan, the proxy generator) rather than typing it: it already carries the country, the session id and the session length in the username. The table shows what each field holds.

| Plan | Host | HTTP port | SOCKS5 port | Username shape |
| --- | --- | --- | --- | --- |
| Residential Premium | residentialpremium.quantumproxies.io | 8080 | 1080 | USER-country-us-sid-k3f9a1b2-ttl-60m |
| Residential Basic | residentialboson.quantumproxies.io | 9000 | from the generator | USER-country-us |
| Mobile | mobile-us.quantumproxies.io (also -eu, -as, ww) | 8080 | 1080 | USER-country-us-type-mobile |
| Datacenter (per GB) | datacenterboson.quantumproxies.io | 9999 | 10000 | USER-type-datacenter-country-de |
| IPv6 | ipv6.quantumproxies.io | 1001 | from the generator | USER-country-us-package-ipv6 |
| ISP (dedicated IP) | the IP of your line | 8000 | on the plan page | the line's own login |

The password is the one the generator prints next to the username. Pick HTTP or SOCKS5 in the tool and use the port of that column; a port from the other column is the most common reason a check fails. USER and the session id are placeholders for your own values.

## Frequently Asked Questions

### What does Paste proxy information expect in Lalicat?

IP:port:Username:Password on one line, as the hint under the button says. The host name of a gateway works in the IP place.

### HTTP, HTTPS or SOCKS5 in Lalicat's proxy settings?

HTTP with the HTTP port, SOCKS5 with the SOCKS5 port. Skip HTTPS: it expects a TLS proxy, which our gateways are not.

### Can I create several Lalicat profiles with different lines at once?

Creat in Bulk makes several profiles, but they would share one proxy. Create them, then edit each profile's proxy with its own sticky line.

## More setup guides

- [VMLogin proxy setup](https://quantumproxies.io/integrations/vmlogin)
- [AdsPower proxy setup](https://quantumproxies.io/integrations/adspower)
- [MoreLogin proxy setup](https://quantumproxies.io/integrations/morelogin)
- [MostLogin proxy setup](https://quantumproxies.io/integrations/mostlogin)
- [All 21 proxy integrations](https://quantumproxies.io/integrations)
- [Proxies for antidetect browsers](https://quantumproxies.io/proxies-for/antidetect-browsers)
- [Proxies for multi-account management](https://quantumproxies.io/proxies-for/multi-accounting)
- [Mobile proxies on real carrier IPs](https://quantumproxies.io/mobile-proxies)
- [Residential proxies with sticky sessions](https://quantumproxies.io/residential-proxies)
- [Check the exit IP](https://quantumproxies.io/ip-checker) from inside the profile once it is running.