# ClonBrowser Proxy Setup – Step by Step | QuantumProxies.io

Add QuantumProxies to a ClonBrowser profile: Proxy tab, Mode Custom, the Parse box or Host, Port, Username and Password, then Check network. With screenshots.

## ClonBrowser Proxy Setup: Custom Proxy in a New Browser Profile

ClonBrowser puts the proxy on the Proxy tab of the browser profile. Set Mode to Custom, pick the protocol, then either paste the whole line into Parse or fill Host, Port, Username and Password by hand. Check network runs the test; Create Browser saves the profile with the proxy attached.

## Where the proxy goes in ClonBrowser

Browser → New Browser → Proxy tab → Mode: Custom

- **Proxy type:** Protocol
- **Host:** Host (before the colon)
- **Port:** Host (after the colon)
- **Username:** Username
- **Password:** Password

Paste host:port:user:pass into the Parse field and click Parse; ClonBrowser fills the four fields.

## Set up the proxy in ClonBrowser

### 1. Create a new browser profile

Open ClonBrowser, choose Browser in the left menu and click New Browser in the top-left corner. The creation page opens on the Basic tab; move to the Proxy tab.

![ClonBrowser Browser page with the New Browser button in the top-left corner](https://quantumproxies.io/images/integrations/clonbrowser/create-profile.webp)

ClonBrowser Browser page with the New Browser button in the top-left corner

### 2. Open the proxy settings

On the Proxy tab set Mode to Custom. The Parse box and the Protocol, Name, Host, Username and Password fields appear below it.

![ClonBrowser Proxy tab with Mode set to Custom and the Parse box and proxy fields framed in red](https://quantumproxies.io/images/integrations/clonbrowser/proxy-settings.webp)

ClonBrowser Proxy tab with Mode set to Custom and the Parse box and proxy fields framed in red

### 3. Enter the proxy details

Choose the protocol that matches your port (http or socks5). Type the gateway host in Host and the port in the box after the colon, then the username and password. Or paste the full line into Parse and press Parse to fill everything at once. ExpiryTime, IP Probe Channel and Remark can stay at their defaults.

![ClonBrowser proxy form filled with protocol, host, port, username and password and the Check network button](https://quantumproxies.io/images/integrations/clonbrowser/fill-proxy.webp)

ClonBrowser proxy form filled with protocol, host, port, username and password and the Check network button

### 4. Check and create the browser

Click Check network near the bottom. Connect Test Passed shows the country, city and time zone of the exit IP. Then click Create Browser in the lower-left corner; ClonBrowser returns to the browser list with the new profile.

![ClonBrowser browser list after the profile with the proxy was created](https://quantumproxies.io/images/integrations/clonbrowser/test-connection.webp)

ClonBrowser browser list after the profile with the proxy was created

### Check it

Check network, below the proxy fields. Connect Test Passed lists the country, city and time zone.

Open the profile from the browser list. To double-check, load the QuantumProxies IP checker inside it and compare the IP with the test result.

## What to type: hosts, ports and the username

Copy the line from the dashboard (Proxies, your plan, the proxy generator) rather than typing it: it already carries the country, the session id and the session length in the username. The table shows what each field holds.

| Plan | Host | HTTP port | SOCKS5 port | Username shape |
| --- | --- | --- | --- | --- |
| Residential Premium | residentialpremium.quantumproxies.io | 8080 | 1080 | USER-country-us-sid-k3f9a1b2-ttl-60m |
| Residential Basic | residentialboson.quantumproxies.io | 9000 | from the generator | USER-country-us |
| Mobile | mobile-us.quantumproxies.io (also -eu, -as, ww) | 8080 | 1080 | USER-country-us-type-mobile |
| Datacenter (per GB) | datacenterboson.quantumproxies.io | 9999 | 10000 | USER-type-datacenter-country-de |
| IPv6 | ipv6.quantumproxies.io | 1001 | from the generator | USER-country-us-package-ipv6 |
| ISP (dedicated IP) | the IP of your line | 8000 | on the plan page | the line's own login |

The password is the one the generator prints next to the username. Pick HTTP or SOCKS5 in the tool and use the port of that column; a port from the other column is the most common reason a check fails. USER and the session id are placeholders for your own values.

## Frequently Asked Questions

### Which protocol do I pick in ClonBrowser?

http with the HTTP port of your plan, socks5 with the SOCKS5 port. Host, username and password are identical for both.

### Does ClonBrowser accept a pasted proxy line?

Yes. Paste host:port:user:pass into the Parse field at the top of the Proxy tab and click Parse. Choose the protocol before you parse, or correct it afterwards.

### Can I reuse one proxy in several ClonBrowser profiles?

Technically yes, through Existing Proxy, but each profile should have its own session id so that two profiles never share an IP. Generate one sticky line per profile.

## More setup guides

- [AdsPower proxy setup](https://quantumproxies.io/integrations/adspower)
- [ixBrowser proxy setup](https://quantumproxies.io/integrations/ixbrowser)
- [BitBrowser proxy setup](https://quantumproxies.io/integrations/bitbrowser)
- [DICloak proxy setup](https://quantumproxies.io/integrations/dicloak)
- [All 21 proxy integrations](https://quantumproxies.io/integrations)
- [Proxies for antidetect browsers](https://quantumproxies.io/proxies-for/antidetect-browsers)
- [Proxies for multi-account management](https://quantumproxies.io/proxies-for/multi-accounting)
- [Mobile proxies on real carrier IPs](https://quantumproxies.io/mobile-proxies)
- [Residential proxies with sticky sessions](https://quantumproxies.io/residential-proxies)
- [Check the exit IP](https://quantumproxies.io/ip-checker) from inside the profile once it is running.